ChurchRite Brand Heaters

 Baptisty Immersion Water Heater

120 V, 1500 W,  15 amp

 240V, 6000 W, 30 amp  

This item is in stock.

 

Available in either the 120V or 240V style. Plugs into an outlet.

The 120V is designed to heat up to 150 gallons so it is used for small, portable baptistries only.

UL listed

This portable immersion heater is our most economical. The heater is mounted over the side of the baptistery with a stainless steel bracket (provided). Simply plug the pigtail cord into a 240 volt outlet, and set the thermostat to the desired temperature.

·         No cutting or modification to existing baptistery

·         Completely automatic and portable using 42” power cord (Included).

·         Stainless Steel mounting bracket supplied for easy mounting

·         High-limit cut off switch set at 125 degrees F.

·         Immersion section of unit made of “Incoloy” or Stainless Steel.

·         All heat confined to the formed horizontal section for optimum efficiency.

·         Cold riser extends to the top of container where control housing is located.

·         3-Conductor cord set with polarized plug included.

·         Adjustable vapor-proof thermostat control with range from 55° to 115° F.

·         Indicator light and on-off switch indicate when desired temperature is reached and breaks circuit when element is not in use.

·         1 Year Manufacturer's Warranty

  CALL FOR PRICES

Overnight shipping available

---

Model 10 Portable Baptistry Heater

 

The Model 10 is designed for portable baptistries only, up to 150 gallons.  Easy to use with preset thermostat at 100 degrees, it will heat the water overnight to the desired temp for baptism.  Just plug into a 120V household outlet (GFCI built in) (15' long cord) and lay down into the water horizontally. Very safe, all ceramic elements.  Outer surface never overheats.  33" long

Instructions